Skip to main content

Formula

Traditional cyanotype, solution A (Mike Ware)

Use
Sensitiser
Ingredients
1
Water to make
100 mL (distilled)

Handle chemistry safely

Wear gloves and eye protection, work with good ventilation, and read the supplier’s safety data sheet before use. Hazard information here is a summary, not a replacement for it. Dispose of all photographic chemistry correctly, in line with local laws and your local authority’s guidance. Never mix waste solutions, and check the supplier’s safety data sheet before disposing of anything.

Ingredients

ChemicalAmount
Ferric ammonium citrate (green or brown)25 g
Water to make100 mL (distilled)

Notes

Dissolve the ferric ammonium citrate in about 70 mL of distilled water at room temperature, then add water to make 100 mL. The strength need not be exact. Ware prefers the green form; the brown form also works, but prints more slowly. Keep it in a brown bottle in the dark. It often grows mould within a week or two, which a few crystals of thymol floating on the surface will hold off (thymol is harmful). Mix it with an equal volume of solution B shortly before coating. In his 2020 Cyanomicon Ware gives 20 g instead, made up to 100 mL or more, up to 200 mL, and says the strength is not critical.

Amounts as published. Chemical forms (anhydrous, monohydrate and so on) change the weights, so match the form listed.