Skip to main content

Development time

Kodak Ektar 100 in Unicolor C-41

3:30 at 38.9°C (102°F), stock dilution, box speed.

Start timer · 3:30
Time
3:30
Standard
Dilution
Stock
Temperature
38.9°C
102°F
Box speed
ISO 100
C-41

Development time

DilutionEITimeTempAgitationEvidenceTimer
Stock1003:3038.9°C / 102°FStandardManufacturerChecked Oct 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

Colour developers run at 38.9°C (102°F) with a tight tolerance of around ±0.3°C, so there’s no reliable temperature chart. If you can’t hold the temperature, follow your kit’s instructions for its lower-temperature times.

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
StockUse as mixed, undilutedUse as mixed, undiluted

How they work together

Kodak Ektar 100
Kodak (E-4046, 2016) calls it the world's finest-grain colour negative film, with high saturation and ultra-vivid colour, aimed at nature, travel, fashion and product work. Kodak recommends it for commercial photographers and advanced amateurs.
Notes on this pairing
  • Kit time; applies to any C-41 film. Developer step, hand tank at 102 °F: continuous for 10 s, then 4 inversions every 30 s.

Ektar 100 in other developers

Other films in Unicolor C-41