Development time
Kodak Vision3 200T 5213 in CineStill Cs2 Cine Simplified 2-Bath Kit
3:30 at 41°C (106°F), stock dilution, box speed.
Start timer · 3:30- Time
- 3:30
- Dilution
- Stock
- Temperature
- 41°C
- Box speed
- ISO 200
Standard
106°F
ECN-2
Development time
| Dilution | EI | Time | Temp | Agitation | Evidence | Timer |
|---|---|---|---|---|---|---|
| Stock | 200 | 3:30 | 41°C / 106°F | Standard | ManufacturerChecked Oct 2026 | Start timer |
EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.
Other temperatures
Colour developers run at 41°C (106°F) with a tight tolerance of around ±0.3°C, so there’s no reliable temperature chart. If you can’t hold the temperature, follow your kit’s instructions for its lower-temperature times.
Mixing
| Dilution | 300 ml (10.1 fl oz) (one 35mm roll) | 500 ml (16.9 fl oz) (one 120 roll) |
|---|---|---|
| Stock | Use as mixed, undiluted | Use as mixed, undiluted |
How they work together
- Kodak Vision3 200T 5213
- Tungsten-balanced 200-speed motion picture negative that Kodak positions as having 100-speed image structure; respooled for stills by several brands.
- Notes on this pairing
- Kit time; applies to any ECN-2 film. Cs2 Dev&Prebath at 106 °F (41 °C): continuous for 10 s, then 4 inversions every 30 s. Rem-jet must be removed; CineStill recommends one-shot use for rem-jet films.