Kodak Vision3 200T 5213 in Flic Film ECN-2 Kit

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Colour developers run at 41.1°C (106°F) with a tight tolerance of around ±0.3°C, so there’s no reliable temperature chart. If you can’t hold the temperature, follow your kit’s instructions for its lower-temperature times.

Kodak Vision3 200T 5213

Tungsten-balanced 200-speed motion picture negative that Kodak positions as having 100-speed image structure; respooled for stills by several brands.

Notes on this pairing

• Kit time; applies to any ECN-2 film. Developer at 41.1 °C (106 °F): continuous inversion for 10 s, then four inversions every 30 s. Pre-bath at 27 °C, then rinse off rem-jet.

• Bellini ECN-2 Kit

  3:00

  Stock · EI 200 · 41°C

• CineStill Cs2 Cine Simplified 2-Bath Kit

  3:30

  Stock · EI 200 · 41°C

• JOBO ECN-2 Developing Kit

  3:00

  Stock · EI 200 · 41°C

• Kodak Process ECN-2 (SD-49 developer)

  3:00

  Stock · EI 200 · 41.1°C

• Kodak Vision3 500T 5219

  3:00

  Stock · EI 500 · 41.1°C

• Kodak Vision3 250D 5207

  3:00

  Stock · EI 250 · 41.1°C

• Kodak Vision3 50D 5203

  3:00

  Stock · EI 50 · 41.1°C