Development time
Fujifilm Provia 100F in Cinestill Cs6 Creative Slide
6:00 at 40°C (104°F), 1+1 dilution, box speed.
Start timer · 6:00- Time
- 6:00
- Dilution
- 1+1
- Temperature
- 40°C
- Box speed
- ISO 100
Standard
104°F
E-6
All 11 times
| Dilution | EI | Time | Temp | Agitation | Evidence | Timer |
|---|---|---|---|---|---|---|
| 1+1 | 100 | 6:00 | 40°C / 104°F | Standard | ManufacturerChecked Jan 2026 | Start timer |
| 1+1 | 200+1 stop | 8:00 | 40°C / 104°F | Standard | ManufacturerChecked Jan 2026 | Start timer |
| Stock | 200+1 stop | 6:00 | 40°C / 104°F | Standard | ManufacturerChecked Jan 2026 | Start timer |
| Stock | 400+2 stops | 8:00 | 40°C / 104°F | Standard | ManufacturerChecked Jan 2026 | Start timer |
| 1+1 | 50−1 stop | 4:30 | 40°C / 104°F | Standard | ManufacturerChecked Jan 2026 | Start timer |
| 1+1 | 25−2 stops | 3:30 | 40°C / 104°F | Standard | ManufacturerChecked Oct 2026 | Start timer |
| 1+1 | 400+2 stops | 10:30 | 40°C / 104°F | Standard | ManufacturerChecked Oct 2026 | Start timer |
| Stock | 800+3 stops | 10:30 | 40°C / 104°F | Standard | ManufacturerChecked Oct 2026 | Start timer |
| 1+1 | 100 | 26:00 | 22°C / 72°F | Minimal | ManufacturerChecked Oct 2026 | Start timer |
| 1+1 | 100 | 15:00 | 29.5°C / 85°F | Standard | ManufacturerChecked Oct 2026 | Start timer |
| 1+1 | 100 | 9:00 | 35°C / 95°F | Standard | ManufacturerChecked Oct 2026 | Start timer |
EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.
Other temperatures
Colour developers run at 40°C (104°F) with a tight tolerance of around ±0.3°C, so there’s no reliable temperature chart. If you can’t hold the temperature, follow your kit’s instructions for its lower-temperature times.
Mixing
| Dilution | 300 ml (10.1 fl oz) (one 35mm roll) | 500 ml (16.9 fl oz) (one 120 roll) |
|---|---|---|
| 1+1 | 150 ml developer + 150 ml water | 250 ml developer + 250 ml water |
| Stock | Use as mixed, undiluted | Use as mixed, undiluted |
How they work together
- Fujifilm Provia 100F
- Professional color reversal with neutral color balance, fine grain and outstanding sharpness. Exceptional reciprocity for astrophotography.
- Notes on this pairing
- D6 DaylightChrome 1st developer, normal development. Continuous agitation or 15 s every 30 s. D9 DynamicChrome 1+1 is about 9 min instead.
- Push +1 with D6 at 1+1 (~8 min). Alternative: undiluted stock for ~6 min.
- Push +1 with D6 undiluted stock (~6 min).
- Push +2 with D6 undiluted stock (~8 min).
- Pull -1 with D6 at 1+1 (~4.5 min).
- Kit time; applies to any E-6 film. Pull -2 with D6 1+1. At 104 °F.
- Kit time; applies to any E-6 film. Push +2 with D6 1+1. At 104 °F.
- Kit time; applies to any E-6 film. Push +3 with D6 stock solution. At 104 °F.
- Kit time; applies to any E-6 film. D6 normal development at 22 °C from the variable-temperature chart; agitation continuous for the first minute, then 6 inversions every 2 min. Lower temperatures give lower density and colour shifts.
- Kit time; applies to any E-6 film. D6 normal development at 29.5 °C from the variable-temperature chart; agitation continuous for the first 30 s, then 6 inversions every minute. Lower temperatures give lower density and colour shifts.
- Kit time; applies to any E-6 film. D6 normal development at 35 °C from the variable-temperature chart; agitation continuous, or 15 s (6 inversions) every 30 s. Lower temperatures give lower density and colour shifts.