Skip to main content

Development time

Fujifilm Provia 100F in Arista Rapid E-6

6:30 at 40.6°C (105°F), stock dilution, box speed.

Start timer · 6:30
Time
6:30
Standard
Dilution
Stock
Temperature
40.6°C
105°F
Box speed
ISO 100
E-6

All 9 times

DilutionEITimeTempAgitationEvidenceTimer
Stock1006:3040.6°C / 105°FStandardManufacturerChecked Jan 2026Start timer
Stock200+1 stop8:0040.6°C / 105°FStandardManufacturerChecked Jan 2026Start timer
Stock400+2 stops10:3040.6°C / 105°FStandardManufacturerChecked Jan 2026Start timer
Stock50−1 stop4:3040.6°C / 105°FStandardManufacturerChecked Jan 2026Start timer
Stock10013:3029.4°C / 85°FStandardManufacturerChecked Jan 2026Start timer
Stock25−2 stops3:3040.6°C / 105°FStandardManufacturerChecked Oct 2026Start timer
Stock10020:3023.9°C / 75°FStandardManufacturerChecked Oct 2026Start timer
Stock10016:3026.7°C / 80°FStandardManufacturerChecked Oct 2026Start timer
Stock10026:0021.1°C / 70°FStandardManufacturerChecked Oct 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

Colour developers run at 40.6°C (105°F) with a tight tolerance of around ±0.3°C, so there’s no reliable temperature chart. If you can’t hold the temperature, follow your kit’s instructions for its lower-temperature times.

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
StockUse as mixed, undilutedUse as mixed, undiluted

How they work together

Fujifilm Provia 100F
Professional color reversal with neutral color balance, fine grain and outstanding sharpness. Exceptional reciprocity for astrophotography.
Notes on this pairing
  • Hand tank at 105 °F (also 6.5 min in a rotary tube). Add 4% to 1st developer time each time it is reused.
  • Push +1 at 105 °F.
  • Push +2 at 105 °F.
  • Pull -1 at 105 °F.
  • Hand tank at 85 °F.
  • Kit time; applies to any E-6 film. Pull -2: first developer only, at 105 °F.
  • Kit time; applies to any E-6 film. First developer, hand tank at 75 °F.
  • Kit time; applies to any E-6 film. First developer, hand tank at 80 °F.
  • Kit time; applies to any E-6 film. First developer, hand tank at 70 °F; Arista warns of density and colour shifts at this temperature.

Provia 100F in other developers

Other films in Arista Rapid E-6