Skip to main content

Development time

Foma Bohemia Retropan 320 Soft in Microphen

10:30 at 20°C (68°F), stock dilution, box speed.

Start timer · 10:30
Time
10:30
Standard
Dilution
Stock
Temperature
20°C
68°F
Box speed
ISO 320
B&W

All 2 times

DilutionEITimeTempAgitationEvidenceTimer
Stock32010:3020°C / 68°FStandardManufacturerChecked Jan 2026Start timer
Stock640+1 stop15:0020°C / 68°FStandardManufacturerChecked Oct 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
13:0811:4610:309:278:247:346:50

Calculated from the 20°C (68°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
StockUse as mixed, undilutedUse as mixed, undiluted

How they work together

Microphen
Fine grain, moderate acutance, normal contrast. Fine grain with an effective speed increase.
Foma Bohemia Retropan 320 Soft
Panchromatic ISO 320/26 film with fine grain and a wide range of half tones and 'soft light', intended for contact printing or 'retro' style enlarging (Foma). Wide exposure latitude: good results from EI 160 to EI 1250. Foma recommends its Retro Special Developer.
Notes on this pairing
  • Official Foma time, midpoint used. Maker gives 10–11 min.
  • Push +1. Datasheet gives 15 to 17 min; lower figure used.

Retropan 320 Soft in other developers

Other films in Microphen