Skip to main content

Development time

Rollei/Maco Retro 400S in Microphen

16:00 at 20°C (68°F), 1+1 dilution, box speed.

Start timer · 16:00
Time
16:00
Standard
Dilution
1+1
Temperature
20°C
68°F
Box speed
ISO 400
B&W

Development time

DilutionEITimeTempAgitationEvidenceTimer
1+140016:0020°C / 68°FStandardManufacturerChecked Oct 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
20:0017:5516:0014:2412:4811:3110:24

Calculated from the 20°C (68°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
1+1150 ml developer + 150 ml water250 ml developer + 250 ml water

How they work together

Microphen
Fine grain, moderate acutance, normal contrast. Fine grain with an effective speed increase.
Rollei/Maco Retro 400S
Super-panchromatic 400 film on polyester (sensitivity 380-730 nm) with fine grain (RMS 11) and about +/-2 stops latitude; pushes to EI 800.

Retro 400S in other developers

Other films in Microphen