Skip to main content

Development time

Foma Bohemia Foma Ortho 400 in Rodinal

10:00 at 20°C (68°F), 1+50 dilution, box speed.

Start timer · 10:00
Time
10:00
Standard
Dilution
1+50
Temperature
20°C
68°F
Box speed
ISO 400
B&W

Development time

DilutionEITimeTempAgitationEvidenceTimer
1+5040010:0020°C / 68°FStandardManufacturerChecked Oct 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
12:3011:1210:009:008:007:126:30

Calculated from the 20°C (68°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
1+505.9 ml developer + 294 ml water9.8 ml developer + 490 ml water

How they work together

Rodinal
Prominent grain, high acutance, full film speed, variable contrast. Sharp, dramatic, distinct edge effects.
Foma Bohemia Foma Ortho 400
Orthochromatic black-and-white negative film, ISO 400/27 (Foma datasheet: RMS 17.5, 85 lp/mm), with high green sensitivity and high maximum density; handle under orange safelight (585 nm and above), never green. Sold as 120, 35mm 135-36 and sheet film (sheet sizes not stated).
Notes on this pairing
  • Fomadon R09 (Foma's Rodinal-type developer). Datasheet gives 10 to 12 min; lower figure used.

Foma Ortho 400 in other developers

Other films in Rodinal