Skip to main content

Development time

Kodak Portra 160 in Tetenal Colortec C-41

3:15 at 38°C (100°F), stock dilution, box speed.

Start timer · 3:15
Time
3:15
Continuous
Dilution
Stock
Temperature
38°C
100°F
Box speed
ISO 160
C-41

Development time

DilutionEITimeTempAgitationEvidenceTimer
Stock1603:1538°C / 100°FContinuousManufacturerChecked Oct 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

Colour developers run at 38°C (100°F) with a tight tolerance of around ±0.3°C, so there’s no reliable temperature chart. If you can’t hold the temperature, follow your kit’s instructions for its lower-temperature times.

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
StockUse as mixed, undilutedUse as mixed, undiluted

How they work together

Kodak Portra 160
Kodak describes a significantly finer-grain structure than its predecessor for scanning and enlargement while keeping smooth, natural skin tones (E-4051, Feb 2016). Intended for portrait, fashion and commercial work.
Notes on this pairing
  • Kit time; applies to any C-41 film. Colour developer step, rotary at 38 ±0.3 °C, fresh kit (first 1 to 4 films per litre); rises 15 s per further batch of 4 films.

Portra 160 in other developers

Other films in Tetenal Colortec C-41