Skip to main content

Development time

Kodak Portra 400 in Tetenal Colortec C-41

3:15 at 38°C (100°F), stock dilution, box speed.

Start timer · 3:15
Time
3:15
Continuous
Dilution
Stock
Temperature
38°C
100°F
Box speed
ISO 400
C-41

All 5 times

DilutionEITimeTempAgitationEvidenceTimer
Stock4003:1538°C / 100°FContinuousManufacturerChecked Jan 2026Start timer
Stock800+1 stop3:4538°C / 100°FContinuousManufacturerChecked Jan 2026Start timer
Stock1600+2 stops4:1538°C / 100°FContinuousManufacturerChecked Jan 2026Start timer
Stock4008:0030°C / 86°FContinuousManufacturerChecked Jan 2026Start timer
Stock4002:0045°C / 113°FContinuousManufacturerChecked Jan 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

Colour developers run at 38°C (100°F) with a tight tolerance of around ±0.3°C, so there’s no reliable temperature chart. If you can’t hold the temperature, follow your kit’s instructions for its lower-temperature times.

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
StockUse as mixed, undilutedUse as mixed, undiluted

How they work together

Kodak Portra 400
Kodak calls it the world's finest-grain high-speed colour negative film, at true ISO 400 with natural skin tones and wide-ranging lighting performance (Kodak E-4050, Jan 2025). Made with Kodak's T-Grain emulsions; sold in 135, 120 and sheets.
Notes on this pairing
  • Rotary at 38 ±0.3 °C, fresh kit (first 1–4 films per litre). Time rises 15 s per further batch of 4 films: 3:30, 3:45, 4:00.
  • Push +1: colour developer extended 30 s per stop at 38 °C.
  • Push +2: colour developer extended 30 s per stop at 38 °C.
  • Alternative 30 ±0.5 °C process if 38 °C gives uneven results (first 1–4 films per litre).
  • Rapid one-shot development at 45 °C.

Portra 400 in other developers

Other films in Tetenal Colortec C-41