Skip to main content

Development time

Kodak Ultramax 400 in Adox C-TEC 41

3:15 at 38°C (100°F), stock dilution, box speed.

Start timer · 3:15
Time
3:15
Standard
Dilution
Stock
Temperature
38°C
100°F
Box speed
ISO 400
C-41

Development time

DilutionEITimeTempAgitationEvidenceTimer
Stock4003:1538°C / 100°FStandardManufacturerChecked Oct 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

Colour developers run at 38°C (100°F) with a tight tolerance of around ±0.3°C, so there’s no reliable temperature chart. If you can’t hold the temperature, follow your kit’s instructions for its lower-temperature times.

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
StockUse as mixed, undilutedUse as mixed, undiluted

How they work together

Kodak Ultramax 400
Kodak's consumer high-speed colour negative (ISO 400/27), designed for snapshooters: bright, vibrant colours with accurate skin tones, fine grain and good sharpness when enlarged (Kodak E-7023). 135 only.
Notes on this pairing
  • Kit time; applies to any C-41 film. Colour developer step at 38 °C; tank agitated for the first 30 s, then one gentle tilt every 15 s (or continuous rotation). First 4 films per litre; then 3:30, 3:45, 4:00.

Ultramax 400 in other developers

Other films in Adox C-TEC 41