Skip to main content

Development time

Foma Bohemia Fomapan 100 Classic in Rodinal

8:30 at 20°C (68°F), 1+50 dilution, box speed.

Start timer · 8:30
Time
8:30
Standard
Dilution
1+50
Temperature
20°C
68°F
Box speed
ISO 100
B&W

All 5 times

DilutionEITimeTempAgitationEvidenceTimer
1+251006:00Sources differ20°C / 68°FStandardCommunity consensusChecked Jan 2026Start timer
1+501008:3020°C / 68°FStandardManufacturerChecked Jan 2026Start timer
1+10010060:00Sources differ20°C / 68°FStandCommunity consensusChecked Jan 2026Start timer
1+251004:00Sources differ20°C / 68°FStandardManufacturerChecked Oct 2026Start timer
1+10010020:00Sources differ20°C / 68°FStandardManufacturerChecked Oct 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
10:389:318:307:396:486:075:32

Calculated from the 20°C (68°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
1+2512 ml developer + 288 ml water19 ml developer + 481 ml water
1+505.9 ml developer + 294 ml water9.8 ml developer + 490 ml water
1+1003 ml developer + 297 ml water5 ml developer + 495 ml water

How they work together

Rodinal
Prominent grain, high acutance, full film speed, variable contrast. Sharp, dramatic, distinct edge effects.
Foma Bohemia Fomapan 100 Classic
Traditional cubic-grain emulsion with high resolving power and a wide range of halftones (Foma datasheet: RMS 13.5, 110 lines/mm). Rated ISO 100/21 but the maker says it gives good results one stop over (EI 50) or two stops under (EI 400) with no change in development.
Notes on this pairing
  • Higher contrast. Unverified: no film or developer maker publishes this time; Massive Dev Chart (community chart) cache holds no times.
  • Foma datasheet gives 8–9 min for Fomadon R09 (1+50), Foma's Rodinal-type developer; midpoint used. Maker gives 8–9 min.
  • Stand development: Agitate first minute, then leave undisturbed for 1 hour. Unverified: no film or developer maker publishes this time; Massive Dev Chart (community chart) cache holds no times.
  • Fomadon R 09 (Foma's Rodinal-type developer). Guide gives this time for medium contrast (gamma 0.65). Spiral tank: continuous for the first 30 s, then 10 s each minute. Massive Dev Chart gives 6:00.
  • Fomadon R 09 (Foma's Rodinal-type developer); normal intermittent agitation, not stand. Guide gives 20 to 22 min; lower figure used (lower value gives lower contrast). Spiral tank: continuous for the first 30 s, then 10 s each minute.

Fomapan 100 Classic in other developers

Other films in Rodinal