Skip to main content

Development time

Foma Bohemia Fomapan 100 Classic in 510-Pyro

10:30 at 20°C (68°F), 1+100 dilution, EI 80 (−⅓ stop).

Start timer · 10:30
Time
10:30
Stand
Dilution
1+100
Temperature
20°C
68°F
Box speed
ISO 100
B&W

All 2 times

DilutionEITimeTempAgitationEvidenceTimer
1+10080−⅓ stop10:3020°C / 68°FStandManufacturerChecked Jan 2026Start timer
1+10050−1 stop7:1521°C / 70°FContinuousManufacturerChecked Jan 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
13:0811:4610:309:278:247:346:50

Calculated from the 20°C (68°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
1+1003 ml developer + 297 ml water5 ml developer + 495 ml water

How they work together

510-Pyro
Very-high acutance, full film speed, compensating contrast. Exceptional highlight control with subtle staining.
Foma Bohemia Fomapan 100 Classic
Traditional cubic-grain emulsion with high resolving power and a wide range of halftones (Foma datasheet: RMS 13.5, 110 lines/mm). Rated ISO 100/21 but the maker says it gives good results one stop over (EI 50) or two stops under (EI 400) with no change in development.
Notes on this pairing
  • Hartung semi-stand: 1 min continuous inversion, then one inversion at 10, 20, 30 min.
  • Rotary processor or tray, continuous agitation. Presoak.

Fomapan 100 Classic in other developers

Other films in 510-Pyro