Skip to main content

Development time

Kodak Tri-X 400 in PMK Pyro

14:00 at 21.1°C (70°F), 1+2+100 dilution, EI 260 (−⅔ stop).

Start timer · 14:00
Time
14:00
Standard
Dilution
1+2+100
Temperature
21.1°C
70°F
Box speed
ISO 400
B&W

Development time

DilutionEITimeTempAgitationEvidenceTimer
1+2+100260−⅔ stop14:0021.1°C / 70°FStandardManufacturerChecked Jan 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
19:4617:4315:4914:1412:3911:2310:17

Calculated from the 21.1°C (70°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
1+2+100See the developer’s instructionsSee the developer’s instructions

How they work together

PMK Pyro
Fine grain, very-high acutance, full film speed, compensating contrast. Extraordinary highlight separation with proportional staining.
Kodak Tri-X 400
High-speed panchromatic film that Kodak recommends for dim light, fast action and push processing (F-4017). Traditional cubic-grain emulsion known for photojournalism; re-engineered with finer grain in 2007 (Wikipedia list).
Notes on this pairing
  • 70°F (21.1°C). Two inversions every 15 s.

Tri-X 400 in other developers

Other films in PMK Pyro