Development time
Kodak Tri-X 400 in 510-Pyro
16:25 at 20°C (68°F), 1+100 dilution, box speed.
Start timer · 16:25- Time
- 16:25
- Dilution
- 1+100
- Temperature
- 20°C
- Box speed
- ISO 400
All 4 times
| Dilution | EI | Time | Temp | Agitation | Evidence | Timer |
|---|---|---|---|---|---|---|
| 1+100 | 400 | 16:25 | 20°C / 68°F | Stand | ManufacturerChecked Jan 2026 | Start timer |
| 1+100 | 400 | 6:15 | 21°C / 70°F | Continuous | ManufacturerChecked Jan 2026 | Start timer |
| 1+100 | 800+1 stop | 10:00 | 21°C / 70°F | Continuous | ManufacturerChecked Jan 2026 | Start timer |
| 1+100 | 1600+2 stops | 16:15 | 21°C / 70°F | Continuous | ManufacturerChecked Jan 2026 | Start timer |
EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.
Other temperatures
| 18°C64°F | 19°C66°F | 20°C68°F | 21°C70°F | 22°C72°F | 23°C73°F | 24°C75°F |
|---|---|---|---|---|---|---|
| 20:31 | 18:23 | 16:25 | 14:47 | 13:08 | 11:49 | 10:40 |
Calculated from the 20°C (68°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).
Mixing
| Dilution | 300 ml (10.1 fl oz) (one 35mm roll) | 500 ml (16.9 fl oz) (one 120 roll) |
|---|---|---|
| 1+100 | 3 ml developer + 297 ml water | 5 ml developer + 495 ml water |
How they work together
- 510-Pyro
- Very-high acutance, full film speed, compensating contrast. Exceptional highlight control with subtle staining.
- Kodak Tri-X 400
- High-speed panchromatic film that Kodak recommends for dim light, fast action and push processing (F-4017). Traditional cubic-grain emulsion known for photojournalism; re-engineered with finer grain in 2007 (Wikipedia list).
- Notes on this pairing
- Hartung semi-stand: 1 min continuous inversion, then one inversion at 10, 20, 30 min.
- Rotary processor or tray, continuous agitation.
- Rotary processor or tray, continuous agitation. Presoak.
Tri-X 400 in other developers
D-76
6:45
Stock · EI 400 · 20°C · 21 variants
Df96 Monobath
6:00
Stock · EI 400 · 21°C
Diafine
6:00
Stock · EI 1600 · 20°C
HC-110
3:45
1+31 · EI 400 · 20°C · 6 variants
PMK Pyro
14:00
1+2+100 · EI 260 · 21.1°C
Rodinal
7:00
1+25 · EI 400 · 20°C · 3 variants
T-Max Developer
6:00
1+4 · EI 400 · 20°C · 7 variants
XTOL
7:00
Stock · EI 400 · 20°C · 18 variants
Other films in 510-Pyro
Kodak T-Max 400
30:45
1+100 · EI 400 · 20°C · 2 variants
Ilford HP5 Plus
9:00
1+100 · EI 400 · 20°C · 2 variants
Ilford Delta 400
22:00
1+100 · EI 400 · 20°C · 2 variants
Ilford FP4 Plus
20:25
1+100 · EI 125 · 20°C · 2 variants
Harman Technology Kentmere Pan 400
20:30
1+100 · EI 400 · 20°C · 3 variants
Ilford Ilford Delta 100
14:30
1+100 · EI 100 · 20°C · 2 variants
Kodak T-Max 100
8:50
1+100 · EI 100 · 21°C · 2 variants
Foma Bohemia Fomapan 100 Classic
10:30
1+100 · EI 80 · 20°C · 2 variants