Skip to main content

Development time

Kodak Tri-X 400 in Df96 Monobath

6:00 at 21°C (70°F), stock dilution, box speed.

Start timer · 6:00
Time
6:00
Minimal
Dilution
Stock
Temperature
21°C
70°F
Box speed
ISO 400
B&W

Development time

DilutionEITimeTempAgitationEvidenceTimer
Stock4006:0021°C / 70°FMinimalManufacturerChecked Jan 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
8:207:286:406:005:204:484:20

Calculated from the 21°C (70°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
StockUse as mixed, undilutedUse as mixed, undiluted

How they work together

Df96 Monobath
Prominent grain, moderate acutance, full film speed, high contrast. Increased contrast compared to traditional development.
Kodak Tri-X 400
High-speed panchromatic film that Kodak recommends for dim light, fast action and push processing (F-4017). Traditional cubic-grain emulsion known for photojournalism; re-engineered with finer grain in 2007 (Wikipedia list).
Notes on this pairing
  • Monobath process. CineStill gives a minimum of 6 min at 70°F (21°C), minimal agitation; time does not affect development.

Tri-X 400 in other developers

Other films in Df96 Monobath