Skip to main content

Development time

CatLABS CatLABS X Film 320 Pro (120) in 510-Pyro

13:30 at 20°C (68°F), 1+100 dilution, box speed.

Start timer · 13:30
Time
13:30
Standard
Dilution
1+100
Temperature
20°C
68°F
Box speed
ISO 320
B&W

Development time

DilutionEITimeTempAgitationEvidenceTimer
1+10032013:3020°C / 68°FStandardManufacturerChecked Jan 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
16:5315:0713:3012:0910:489:438:47

Calculated from the 20°C (68°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
1+1003 ml developer + 297 ml water5 ml developer + 495 ml water

How they work together

510-Pyro
Very-high acutance, full film speed, compensating contrast. Exceptional highlight control with subtle staining.
CatLABS CatLABS X Film 320 Pro (120)
CatLABS X Film 320 Pro for 120 (the maker's listing also sold 35mm, now sold out). Medium-speed, rated EI 200 outdoors in bright sun and pushable to 1600, with extended sensitivity to about 750 nm for infrared work (R72 filter, ISO 3-5). The maker does not state the emulsion origin; the Wikipedia list gives USA/EU. Non-DX.
Notes on this pairing
  • Maker's most recommended developer: finest grain, maximum speed.

CatLABS X Film 320 Pro (120) in other developers

Other films in 510-Pyro