Skip to main content

Development time

Kodak T-Max 100 in 510-Pyro

8:50 at 21°C (70°F), 1+100 dilution, box speed.

Start timer · 8:50
Time
8:50
Continuous
Dilution
1+100
Temperature
21°C
70°F
Box speed
ISO 100
B&W

All 2 times

DilutionEITimeTempAgitationEvidenceTimer
1+10064−⅔ stop20:0020°C / 68°FStandManufacturerChecked Jan 2026Start timer
1+1001008:5021°C / 70°FContinuousManufacturerChecked Jan 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
12:1611:009:498:507:517:046:23

Calculated from the 21°C (70°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
1+1003 ml developer + 297 ml water5 ml developer + 495 ml water

How they work together

510-Pyro
Very-high acutance, full film speed, compensating contrast. Exceptional highlight control with subtle staining.
Kodak T-Max 100
Kodak describes it as a medium-speed (ISO 100/21) panchromatic film with extremely high sharpness, extremely fine grain and very high resolving power, good for detailed subjects and copying (F-4016, June 2018). Kodak calls it the world's finest-grain 100-speed black-and-white film.
Notes on this pairing
  • Hartung semi-stand: 1 min continuous inversion, then one inversion at 10, 20, 30 min.
  • Rotary processor or tray, continuous agitation.

T-Max 100 in other developers

Other films in 510-Pyro