Skip to main content

Development time

Kodak T-Max 400 in 510-Pyro

30:45 at 20°C (68°F), 1+100 dilution, box speed.

Start timer · 30:45
Time
30:45
Stand
Dilution
1+100
Temperature
20°C
68°F
Box speed
ISO 400
B&W

All 2 times

DilutionEITimeTempAgitationEvidenceTimer
1+10040030:4520°C / 68°FStandManufacturerChecked Jan 2026Start timer
1+1004007:0021°C / 70°FContinuousManufacturerChecked Jan 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
38:2634:2630:4527:4124:3622:0819:59

Calculated from the 20°C (68°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
1+1003 ml developer + 297 ml water5 ml developer + 495 ml water

How they work together

510-Pyro
Very-high acutance, full film speed, compensating contrast. Exceptional highlight control with subtle staining.
Kodak T-Max 400
Kodak describes it as a continuous-tone panchromatic film with high speed (ISO 400/27), very high sharpness, very fine grain and very high resolving power (F-4043). Tabular T-Grain emulsion.
Notes on this pairing
  • Hartung semi-stand: 1 min continuous inversion, then one inversion at 10, 20, 30 min.
  • Rotary processor or tray, continuous agitation.

T-Max 400 in other developers

Other films in 510-Pyro