Skip to main content

Development time

Kodak T-Max 400 in Df96 Monobath

12:00 at 21°C (70°F), stock dilution, box speed.

Start timer · 12:00
Time
12:00
Minimal
Dilution
Stock
Temperature
21°C
70°F
Box speed
ISO 400
B&W

Development time

DilutionEITimeTempAgitationEvidenceTimer
Stock40012:0021°C / 70°FMinimalManufacturerChecked Jan 2026Start timer

EI is the speed the film was rated at when shooting. Evidence says where each time comes from: the manufacturer’s own data, a named test, a compilation or several agreeing reports (community consensus), or one person’s report. Times marked “not yet verified” come from secondary sources and haven’t been checked against a manufacturer datasheet. Where sources give different times, every one is listed and marked “sources differ”.

Other temperatures

18°C64°F19°C66°F20°C68°F21°C70°F22°C72°F23°C73°F24°C75°F
16:4014:5613:2012:0010:409:368:40

Calculated from the 21°C (70°F) time using Ilford’s temperature compensation factors, not taken from a datasheet. Most B&W developers behave well between 18–24°C (64–75°F).

Mixing

Dilution300 ml (10.1 fl oz) (one 35mm roll)500 ml (16.9 fl oz) (one 120 roll)
StockUse as mixed, undilutedUse as mixed, undiluted

How they work together

Df96 Monobath
Prominent grain, moderate acutance, full film speed, high contrast. Increased contrast compared to traditional development.
Kodak T-Max 400
Kodak describes it as a continuous-tone panchromatic film with high speed (ISO 400/27), very high sharpness, very fine grain and very high resolving power (F-4043). Tabular T-Grain emulsion.
Notes on this pairing
  • Monobath process. Tabular-grain films need double the label time to clear (2 x 6 min minimum at 70°F / 21°C); pink dye cast is normal.

T-Max 400 in other developers

Other films in Df96 Monobath